Just introduction and conclusion Essay Example | Topics and Well Written Essays - 250 words

Just introduction and conclusion - Essay Example The paper discusses in detail the different strategies that can be implemented in order to design the timer for the above mentioned company. The paper also seeks to answer the questions related to the components needed to design, implement, and a test a timer for a company. The main aim of the report was to come up with question list following the inquiry from the client. The report also aims at improving the interpretation of the needs of customers and taking the necessary actions. Additionally, the paper also helps to gain the relevant experience to come up a preliminary product specification(Chou and Hsiao, 2005). ABC Limited is one of the leading companies in manufacturing company. Based on the company’s inquiry, the report will provide some of the electronic timer quotations. The electronic timer will be used to control the chemical processes in the company. To perform this, the more information was gathered from the client and recorded directly to the logbook. When R1 was connected the Vb total was found to be 20mV while the Vb for the alternating current was found to be 40mV. The main function of R1 was to reduce the Direct Current, which was placed at the bottom of the transistor. When C1 was disconnected the Vb total came to 24mV while the Alternating current for Vb was recorded at 50mV. The main purpose of the C1 was to add the Direct Current component into the transistor’s bases. In situations when the C1 was absent, the 0.7 Vc threshold needed was subtracted so that the transistor could be turned on. Additionally, in the process of the experiment, R3 was increase to 5.1 kilo ohms  (Xie and Shi, 2010). The function of R3 on this case was to limit the current that went into the base, therefore, reducing the collecting current, which later increased voltage via the collector. One of the limitation that was experienced is that when